- 1
- Unit/Units
- 20000.00 INR
Available in sizes ranging from DN 25mm To 450mm, the Swing Type Foot Valve is designed to be installed in suction side of pump in order to avoid flow reversal from pump to sump. Also, it maintains pressure so as to keep the flow of water in proper control according to the it is needed. It is made of selected graded cast iron, which is completely coated with metallic coating to make it anti-corrosive. The Swing Type Foot Valve is great for fire protection, municipal water treatment, irrigation system and car wash.
Dimension Data :
Nominal Dia (DN) | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | 450 |
Diameter of End (ØD). Max. | 120 | 140 | 150 | 160 | 220 | 240 | 290 | 340 | 380 | 580 | 625 | 750 | 770 | 870 | 900 |
Flanged Ended :
- Flanges as Per IS 1538 Table E/ Table D / As Class 150 / Descried by Customer.
Screwed Ended
Nominal Dia. (N) | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 |
Length (L) of Threaded Portion | 12 | 14 | 14 | 16 | 20 | 22 | 26 | 26 | 26 |
Height (H) of Hexagonal Head | 12 | 14 | 14 | 16 | 20 | 22 | 26 | 26 | 26 |
Test Pressure
Test for Body / Seat | Test Pr. MPa (Gauge) | Test Duration min. |
Body | 0.6 (Hyd) | 5 |
Note : The above data is subject to change without notice due to our continuing program of product improvement.
- As per Order Per Week
- 15 Days
Plot No.74-75, Behind Sharp Chucks, Near Industrial Estate, Jalandhar, Punjab, 144012, India
Phone :+918068090314